Filter
Top Products
-23-
ACCESSORIES AND HARDWARE
INSTALLATION
1. BEFORE INSTALLATION
When mounting the unit in a car, keep the unit as level as possible.
If the unit must be mounted at an angle, due to the design of the
vehicle, make sure the unit does not tilt by more than 30°.
Mounting Bracket
(Half Sleeve) x 1
Rear Strap
(Brace) x 1
Screw 5 x 14
x 1
Hex bolt M5 x 8
x1
Removable Trim Ring
x 1
Unlock Levers
x 2
Screw 2 x 6
x 2