Filter
Top Products
-20-
CLOCK
DISPLAY MODE CHANGE.......................................... 1
The display on the unit can be changed by pressing DISP button . Press the DISP button to switch
between the clock and audio display. When a radio, tape and CD function is performed while the time display
is selected, the audio display will appear for 5 seconds, then the display will return to the time mode.
ADJUSTING THE TIME .............................................. 1, 2, 3
To adjust the time, press the DISP button for more than 2 seconds. The time display blinks.
To adjust the minute, press the > button
.
To adjust the hour, press the < button
.
To advance the time rapidly, hold the > or < button continuously.
Press DISP button
again to start the clock.
CLOCK RESET ......................................................... 1, 4
Press DISP button for more than 2 seconds and the time display blinks. While blinking, press preset
button 6
to skip to the nearest half-hour as follows:
Example: 3:00
– 3:29 3:00
3:30
– 3:59 4:00
1
3
2
4