Filter
Top Products
-11-
RADIO OPERATION
SELECTING RADIO MODE ........................................ 1
Press the BAND button to switch from CD player, CD changer or tape mode to the radio.
Each time the BAND button is pressed, the selected band changes as shown below.
RADIO TUNING ........................................................ 2
• Automatic tuning............Press the > or < button for more than 0.5 second until it beeps twice if the beep
tones are on. When the button is released, the system will start automatic tuning
and stop at the next receivable station.
•
Manual tuning ................To select higher frequency stations, press the > button for less than 0.5
second.To select lower frequency stations, press the < button for less than 0.5
second. To quickly scan up or down in frequency, press and hold the > or <
button. Release the button when the display approaches the desired frequency,
then press and release the button repeatedly until the desired frequency is
displayed.
STORING PRESET STATIONS ................................... 3
The preset buttons can be used to store 6 stations in each band (FMI, FMII, FMIII and AM) for convenient
access to your favorite stations.
• Programming stations
.....
Select the desired band, then tune in the station you want to store in memory.
Press and hold one of the preset buttons for more than 2 seconds.
Repeat steps
and
to program additional stations.
• Quick tuning....................Select the desired band, then press one of the six preset buttons.
1
2
1 2
FMI FMII AM
FMIII
4
1
2
3
5