Sharp LB-1085 Car Video System User Manual


 
30
Specications
Model LB-1085
LCD panel
108˝ screen size class Advanced Super View & BLACK TFT LCD
(Diagonal Measurement: 2,732.7 mm)
Resolution 2,073,600 pixels (1,920 x 1,080)
Audio out 15W x 2 (4 Ω)
Terminals
Rear
INPUT 1 COMPONENT in, Audio in
INPUT 2 AV in, S-VIDEO in
INPUT 4 HDMI in with HDCP
INPUT 5 HDMI in with HDCP
INPUT 6 Audio in, HDMI in with HDCP
INPUT 7 DVI-I in with HDCP, Audio in (Ø 3.5 mm jack)
DIGITAL AUDIO OUTPUT Optical Digital audio output x 1 (PCM)
OUTPUT Audio out
RS-232C 9-pin D-sub male connector
SPEAKER Speaker Terminal
Side INPUT 3 AV in, COMPONENT in
OSD language English/German/French/Spanish
Power Requirement AC 200-240 V, (Single-phase, 3-wire type) 50/60 Hz
Power Consumption 1,130 W (0.8 W Standby with AC 200 V)
Weight
LCD Monitor + stand*
1
250.0 kg
LCD Monitor only 195.0 kg
Dimension*
2
(W x H x D)
LCD Monitor + stand*
1
2572 x 1815 x 600 mm
LCD Monitor only 2572 x 1591 x 204 mm
Operating temperature 0°C to +40°C
*
1
With factory-shipped stand.
*
2
The dimensional drawings are shown on the inside back cover.
The heights include the protruding part of the eye bolt. The depth excludes protrusions.
As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes
for product improvement without prior notice. The performance specification figures indicated are nominal values of
production units. There may be some deviations from these values in individual units.
The TFT color LCD panel used in this monitor is made with the application of high precision technology. However,
there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is
viewed from an acute angle there may be uneven colors or brightness.
Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance of
the monitor.
Appendix