Filter
Top Products
DIS Digital Conference System User Manual
Installation Manual SW 6000 ver 6.2.docx
35
7.3 Customer Logo
The DIS logo in the CUA application can be
exchanged with a customer logo.
Do the following:
1
Open the file "CUA logo background.bmp"
with a graphics-editing program like ‘Paint’.
The file is found on the SW 6000 CD-
ROM in
the folder ‘SW6000 Accessories\Customer
logos’.
The image in the file has the same colour as
the default
background for the CUA
application.
The image size is 214x162 pixels and the
new logo must have the same image size.
2
Open a new instance of ‘Paint’ and open the
file with the customer logo.
3
Select the part of the logo which shall be
used and select ‘copy’.
4
Insert the selected part of the customer logo
into the background file and edit the colours
if needed.
5
Save the file as: logo.bmp (24 bit)
6
Move or copy the just created logo file to the
same directory where the CUA executable is
placed, normally ‘C:\Program
Files\DIS\Conference User Application’.
7
When starting the CUA application now the
customer logo has replaced the DIS logo
7.4 Creating Database Connections
If your CUA or CAA application on the PC shall
have access to more databases you must check
the checkbox ‘Create Hall Definitions’ when
prompted during installation of the CUA, CAA.
During the installation of SW 6000 software, if
the ‘Create Hall Definitions’ checkbox is selected,
it is time to set the hall definitions, the following
window will appear.
Figure 7.4-A Create Database Connection
Inside the window there is a grid with 4
columns:
• Location A description of
the location of the computer, where the
database is installed.
• CUI Computer Name The name of the
computer, where the CUI is installed (and
database).
• Database Name A name
identifying the database for the user.
• ConnectionString The string, which
the CU Interface uses to connect to the
specified database. Pressing the ‘Create
ConnectionString’ button at the bottom
of the window creates the
ConnectionString.
There are 6 buttons at the bottom of the
window.
1. ‘Delete’ button will delete the current
row in the grid.
2. ‘Save’ button will save all row present in
the grid to Windows registry.
3. ‘Cancel’ button will cancel any changes
made to the Database Connections.
4. ‘Close’ button will close the window.
5. Create ConnectionString’ button is used
to create a ConnectionString for the
current row on the grid. When this
button is pressed, a new window ‘Figure
7.4-B Generate Connection String’ pops
up.
a. Data Source Type - Select if the
database is SQL Express or SQL.