Filter
Top Products
SCD-XA5400ES
5
Pull out the tray
in the direction of arrow
#
.
Rotate the cam (66)
with a tapering driver
in the direction of arrow
"
.
cam (66)
– BOTTOM VIEW –
#
"
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURNS OFF
connect jig (extension cable J-2501-102-A) to
MAIN board (CN501, CN1100) and
AUDIO board (CN151, CN152).
MAIN board
(CN501)
AUDIO board
(CN152)
MAIN board
(CN1100)
AUDIO board
(CN151)
insulator sheet
Note: insert the insulator sheet to prevent short.
CAUTION
Be sure to execute a solder bridge as a measure against
static electricity when removing the optical pick-up or
DMB-FIT board.
(Otherwise, the OP block will be destroyed.)
mechanism deck
– BOTTOM VIEW –
MAIN BOARD SERVICE POSITION
In checking the MAIN board, prepare jig (extension cable J-2501-102-A: 1 mm Pitch, 13 cores, Length 300 mm).
PRECAUTION WHEN REMOVING OPTICAL PICK-UP BLOCK OR DMB-FIT BOARD