Filter
Top Products
49
DSR Series
60.9E : SUPERIMPOSE SENSE
This command is used to request SUPERIMPOSE STATUS of the DEVICE. When the DE-
VICE receives this command, it returns the “71.9E : SUPERIMPOSE STATUS” command.
The SUPERIMPOSE STATUS with DATA-1 that shows the setting will be sent back.
71.9E : SUPERIMPOSE STATUS
This return command is returned in response to the “60.9E : SUPERIMPOSE SENSE” com-
mand from the CONTROLLER. The DEVICE returns the data that the command is added to
the SUPERIMPOSE ON/OFF data.
For the data format, refer to “41.9E : SUPERIMPOSE”.
60.AE : AUDIO MONITOR CHANNEL SENSE
This command is used to request the selection channel of the audio monitor. When the DEVICE
receives this command, it returns the “74.AE : AUDIO MONITOR CHANNEL STATUS”
command. The AUDIO MONITOR CHANNEL STATUS with DATA-1 through DATA-4 that
shows the setting will be sent back.
74.AE : AUDIO MONITOR CHANNEL STATUS
The return command is returned in response to the “60.AE : AUDIO MONITOR CHANNEL
SENSE” command. The DEVICE returns the current selection.
For the data format, refer to the “44.AE : AUDIO MONITOR CHANNEL SELECT” command.
60.C2 : TIMELINE SOURCE SENSE
This command is used to inquire which source is selected as the source of timeline.
71.C2 : TIMELINE SOURCE
This return command is returned in response to the “60.C2 : TIMELINE SOURCE SENSE”
command.
[DATA-1]
00 : Internal Clock (Built-in clock which is synchronized with the reference video signal)
60.C3 : TIMELINE TIME SENSE
This command is used to request the present time value of the TIMELINE.
When the exact time value is required, the TIMELINE TIME SENSE and the RETURN must be
completed within the second field while it is synchronized with the reference video signal of the
device.
75.C3 : TIMELINE TIME
This return command is returned in response to the “60.C3 : TIMELINE TIME SENSE”
command, and returns the following data.
[DATA-1]
This indicates the source of TIMELINE which is selected at present.
00 : Internal Clock (Built-in clock which is synchronized with the reference video signal)
[DATA-2 to DATA-5]
This indicates the present time value of the TIMELINE.
For the data format, refer to “24.31 : CUE UP WITH DATA”.