Filter
Top Products
26
Network
Internet Protocol (TCP/IP)
Select “Specify an IP address” to enter each
value in the IP address’s numeric string.
Select “Obtain an IP address (DHCP)” to
acquire an IP address automatically from
the DHCP server. In this case, be aware
that the IP address will change each time
the display attached to the BKM-FW50 is
turned on.
Note
The BKM-FW50 requires a separate IP
address for the display control function and
the still image/video playback function.
The IP address for the display control
function can be set from the menu of the
display attached to the BKM-FW50. For
details, see “Setting an IP address for the
display control function” (page 9).
Password
The administrator and user name and
password information can be entered here.
The administrator name is fixed to “root”.
Each can be a maximum of 8 characters
long.
Once a user name and password are set, the
“Network Password” screen appears
whenever the display control screen of the
BKM-FW50 is called up. To ensure
security on the network, setting a user name
and password is recommended.
Mail Report
When a display function error has occurred,
an error report is immediately sent by e-
mail (error notification).
However, there is no error notification
when an error occurs with the Player.
Address
Enter the target e-mail address here. Up to
four addresses can be specified, for
simultaneous sending of an error report.
The maximum length for each address is 64
characters.
Mail Account
Mail Address:
Enter the allocated mail address here.
The maximum length for the address is
64 characters.
Outgoing Mail Server (SMTP):
Enter the mail server address here.
The maximum length for the address is
64 characters.
Requires the use of POP
Authentication before Send e-mail
(POP before SMTP):
If POP authentication is required when
connecting to the SMTP server, select
this check box.
Incoming Mail Server (POP3):
When POP authentication is used for
the “POP before SMTP” setting, enter
the POP3 server address here.
Account Name:
Enter the mail account name here.
Password:
Enter the mail password here.
Send Test Mail:
To test whether mail can be sent
successfully to the specified
address(es), select this check box and
click “Apply”. A test mail will be sent.
Note
If any of the following items is not set or
not set correctly, an error message appears,
and test mail cannot be sent:
• Target address
• Mail account address and mail server
address (SMTP)
Advanced
Gives access to advanced settings to enable
use of various applications on the network.
Make the settings as required by the
respective application.
Advertisement
Lets you make settings for the
Advertisement and Broadcast functions on
the network.
Computer Operation