Filter
Top Products
Selecting the Menu Language
14
4 If ASIA EXCEPT JAPAN is selected:
Customers who will use this unit in the shaded
areas shown in the map below should select NTSC
AREA.
Other customers should select PAL AREA.
3
Press the M or m button to narrow the area further
and then press the , or ENTER button.
The SELECT SETTING screen disappears and the
menu item settings suitable for the selected area are
applied.
Note
When you have selected the wrong area, set the
following items using the menu.
COLOR TEMP (on page 17)
COMP LEVEL(on page 18)
NTSC SETUP (on page 18)
See “The default setting values for each area” (on
page 13) on the setting value.
Selecting the Menu
Language
You can select one of seven languages (English, French,
German, Spanish, Italian, Japanese, Chinese) for
displaying the menu and other on-screen displays.
The current settings are displayed in place of the x
marks on the illustrations of the menu screen.
1
Press the POWER switch to turn on the unit.
2
Press the MENU button.
The menu appears.
The menu presently selected is shown as a yellow
button.
A S I A E X C E P T J A P A N
x N T S C A R E A
• P A L A R E A
NTSC area
PAL area
RESET
MENU VOLUME POWER
ENTER
LINE A LINE B SDI SCANASPECT
RESET
MENU VOLUME POWER
ENTER
RGB/
COMPONENT
EXT
SYNC
BLUE
ONLY
3~5 2 1
CONTROL
· CONTRAST x
· BRIGHT x
· CHROMA x
· PHASE x
· APERTURE xxx
USER CONTROL