Filter
Top Products
Troubleshooting
19
REMOTE PARALLEL menu
Select the PARALLEL REMOTE connector pins for
which you want to change the function.
You can assign various functions to 1 to 4 pins and 6 to
8 pins. The following lists the functions you can assign
to the pins.
• – – – (“– – –”: No function is assigned.)
•LINE A
•LINE B
• RGB/COMP
•16:9
•4:3
• UNDER
• NORMAL
•ZOOM
•TALLY
• EXT SYNC
•BLUE ONLY
•SDI
Note
If you use the PARALLEL REMOTE function, you
need to connect cables. For more details, see page 21.
KEY INHIBIT menu
You can lock the setting so that they cannot be changed
by an unauthorized user.
Select OFF or ON.
If you set ON, all items are displayed in blue, indicating
the items are locked.
Troubleshooting
This section may help you isolate the cause of a problem
and as a result, eliminate the need to contact technical
support.
• The display is colored in green or purple t By
pressing RGB/COMPONENT button, select the
correct input with the RGB/COMP SEL setting in the
USER CONFIG menu.
• The unit cannot be operated t The key protection
function works. Set the KEY INHIBIT setting to OFF
in the KEY INHIBIT menu.
x1PIN xxxxx
· 2PIN xxxxx
· 3PIN xxxxxxx
· 4PIN xxxxxxx
· 6PIN xxxxxxxx
· 7PIN xxxxxxxxx
· 8PIN xxxx
REMOTE PARALLEL
xKEY INHIBIT xxx
KEY INHIBIT