Filter
Top Products
Recording
13
Recording a tape on an
MD
You can make an analogue recording of a tape on
an MD. You can use TYPE I (normal), TYPE II
(CrO2) tape. The recording level is automatically
adjusted.
52
36
4
5 Press H on the MD deck.
Recording starts.
When the recording is completed, the CD
player and the MD deck stop automatically.
To Do this
Stop recording Press s on the MD deck or CD
player.
Remove the
MD and CD
Press A on the MD deck and CD
player in stop mode.
Tips
• If you use a partially recorded MD, recording starts
after the recorded tracks. To erase the recorded
contents, see “Erasing recordings” on page 31.
• Depending on the disc, CD TEXT information may
also be recorded. If “CD-TEXT” flashes during
recording, press NAME EDIT on the remote, and
then press ENTER/YES to record the title of the
current track. (If “CD-TEXT” is lit, it is
automatically recorded.)
Note
If the MD is record protected, “C11” and “Protected”
appear alternately and the MD cannot be recorded.
Remove the MD, then slide the record protection tab
to the closed position (see page 11).
continued