Filter
Top Products
26
Adjusting the recording
level
When recording on an MD, you can adjust the
recording level to the desired volume. You can
adjust the recording level not only when making
an analogue recording, but also when making a
digital recording from a CD, etc.
Once adjusted, the recording level is maintained
until you adjust it again.
1,2,4
2,3
1,5
1 Press MENU/NO during recording
pause to display “MD Setup ?”, then
press ENTER/YES.
2 Turn l/L until “Level Adjust”
appears, then press ENTER/YES.
3 Turn l/L to adjust the recording
level.
The sound source and recording level are
displayed. The recording level can be
adjusted from –12 to +12. While monitoring
the sound, adjust to the optimum level while
making sure that “OVER” does not appear in
the display at the loudest portion.
Adjust the level so that “OVER”
does not appear
4 Press ENTER/YES.
5 Press MENU/NO.
Notes
• If you adjust the recording level during recording
such as part-way through a track, the recorded
volume changes at the point where the adjustment
was performed.
• If “OVER” appears in the display when the
recording level is between –12 and 0, change the
audio input level and reduce the input sound.