Filter
Top Products
18
6 Press DIRECTION on the tape deck
repeatedly until g appears to record
on one side or h (or j) to record on
both sides.
If you select both sides recording and the
tape reaches the end of the front side part-
way through a track, the entire track is
recorded again from the beginning of the
reverse side. When you start recording from
the reverse side, the recording stops at the
end of the reverse side even though you
select h.
7 Press S on the tape deck.
Recording starts.
8 Press H on the MD deck.
MD play starts.
When the recording is completed, the MD
deck stops.
To stop recording
Press s on the tape deck.
Tip
When you want to reduce the hiss noise in high-
frequency signals recorded at low level, press
DOLBY NR after step 6 so “DOLBY NR” appears in
the display. Turning DOLBY NR on reduces the
noise when playing back these types of signals.
Recording your favourite MD
tracks
You can select your favourite MD tracks with the
Programme Play feature, then record the
programme on a tape.
`/1
2
3
1
5
1 Press MD to switch the function to MD.
2 Press PLAY MODE repeatedly until
“PROGRAM” appears in stop mode.
Recording an MD on a tape
(continued)