Filter
Top Products
20
5 Press z REC on the MD deck.
The z REC indicator lights up.
The MD deck stands by for recording.
6 Press H on the MD deck.
Recording starts.
To Do this
Stop recording Press s on the MD deck.
Pause Press S on the MD deck.
Press S again or H on the
MD deck to restart recording.
Remove the MD Press A on the MD deck in
stop mode.
Tips
• If you use a partially recorded MD, recording starts
after the recorded tracks. To erase the recorded
contents, see “Erasing recordings” on page 31.
• If noise is heard while recording an AM radio
programme, move the AM loop aerial to reduce the
noise or connect a ground wire to the U terminal
(refer to the CMT-SP55TC Operating Instructions).
Note
If the MD is record protected, “C11” and “Protected”
appear alternately and the MD cannot be recorded.
Remove the MD, then slide the record protection tab
to the closed position (see page 11).
Timer recording radio
programmes
To timer record, you must first preset the radio
station and set the clock (refer to the
CMT-SP55TC Operating Instructions). You can
make a timer recording of a radio programme or
the audio signal from a digital component
connected to AUX IN (see page 39).
`/1
3–6
3–6
3–6
2
8
1 Prepare the sound source you want to
play.
• Radio: Tune in the preset radio station
(refer to the CMT-SP55TC Operating
Instructions).
• AUX: Set the timer of the component
connected to DIGITAL OPTICAL AUX
IN. For details, refer to the operating
instructions of the connected component.
2 Press CLOCK/TIMER SET.
3 Press . or > repeatedly until
“SET MD REC” appears, then press
ENTER/YES.
The hour indication flashes.
Recording from the radio
(continued)