Filter
Top Products
39
Editing/Optional Components
3 Press ENTER/YES.
One of the following messages appears,
depending on the last edit.
Editing done Message
Labelling a track or
an MD
“MD Name Undo?”
Erasing labelled
titles
Erasing a single
track
“MD Erase Undo?”Erasing all tracks
Erasing a portion
of a track
Moving a track “MD Move Undo?”
Dividing a track “MD Divide Undo?”
Combining tracks “MD Combine Undo?”
4 Press ENTER/YES again.
“MD Complete!!” appears for a few seconds
and the contents of the MD are restored to
the condition before the edit.
To cancel Undo
Press MENU/NO before completing the
procedure.
Optional Components
Connecting a digital
component
Connect the digital component using audio cords
(not supplied) and an optical cable (square optical
connector, not supplied). The digital audio signal
from the connected component is digitally
recorded to the MD.
The analogue connection is for monitoring the
audio, and the digital connection is for recording.
If there is no analogue connection, no sound will
be produced from the speaker. The digital audio
signal from the connected component is recorded
to the MD. However, if the digital component is
not connected to the DIGITAL OPTICAL AUX
IN, the audio connected to the AUX IN (analogue)
will be recorded as an analogue signal.
Also refer to the operating instructions for each
component.
continued