Filter
Top Products
5
Getting Started
Preparations
1 Stack the components vertically in the order of
tuner, amplifier, CD player, tape deck and MD
deck.
2 Disconnect the system cable supplied with
CMT-SP55TC from the SYSTEM CONTROL
3 connectors on the tuner and tape deck.
1 Connect the supplied digital cable to
DIGITAL OPTICAL OUT on the CD
player and DIGITAL OPTICAL CD
IN 1 on the MD deck.
Take the caps off the connectors, then insert
the plugs until they click into place.
IN
2
C
D
A
U
X
D
I
G
I
T
A
L
O
P
T
I
C
A
L
D
I
G
I
T
A
L
O
P
T
I
C
A
L
S
Y
S
T
E
M
C
O
N
T
R
O
L
3
IN
1
S
Y
S
T
E
M
C
O
N
T
R
O
L
2
O
U
T
2 Connect the SYSTEM CONTROL 3
connectors in the order of the tuner, tape
deck and MD deck using the system
cable supplied with MDS-SP55.
S
Y
S
T
E
M
C
O
N
T
R
O
L
3
S
Y
S
T
E
M
C
O
N
T
R
O
L
3
Notes
• The system cable is used to send signals and
electricity between the components for
interlinked operation.
Be sure to insert the connector horizontally
until it clicks into place. Otherwise the system
will not operate correctly.
• Keep the system cable away from the aerials
to prevent noise or malfunction.
3 Connect the mains lead to the mains
after you complete all the connections.
Arranging the components side
by side
Once you have finished the connections, you can
rearrange the components as desired.
Tip
All information for the MDS-SP55 MD deck appears
in the display on the tuner of CMT-SP55TC.