Filter
Top Products
Technical Specification
Page B-16 Reference Guide: TT128x High Definition Professional Receiver/Decoder
ST.RE.E10141.5
Input Specification
Safety status SELV
Connector type 8 way RJ-45
Connector Designation 10/100 BT
Signal Type 10/100BaseT Ethernet (IEEE 802.3/802.3u)
Data Rate 1.5 – 50 Mbit/s
B.4.7 SSI Input (SMPTE 310M)
Table B.20: SSI Input (SMPTE 310M) Specifications
Input Specification
Safety status SELV
Connector type BNC, Female
Input impedance 75 Ω
Data Rate Range 0 – 19.39 MHz
Error decoding None
B.4.8 Frame Sync Connector
The Decoder can frame lock to an external video source. The frame
information is input as a composite synchronous signal, with or without
active video. The user can offset the sync to the video output by ±32,000
HD pixels, with a resolution of one pixel.
It is possible to connect multiple Receivers to the same reference signal.
This input requires an external 75 Ω termination.
Table B.21: Frame Sync Connector
Item Specification
Safety status SELV
Connector type BNC, Female
Connector designation Frame Sync
Pin: Centre Analogue Black and Burst Input
Shield Ground/Chassis
B.5 Output Specifications
B.5.1 Video Outputs
Analogue HD Video
Table B.22: Analogue Video Output Connectors
Item Specification
Safety status SELV