TANDBERG TT1280 Car Satellite TV System User Manual


 
Installing the Equipment
Reference Guide: TT128x High Definition Professional Receiver/Decoder Page 2-13
ST.RE.E10141.5
2.8.4 SVGA Output (RGB HV)
The IRD is equipped with a SVGA 15-pin D-type
connector for video output in the standard
configuration.
The SVGA connector shall be set to RGB/HV (SVGA)
or YPrPb under control of the user interface and
remote control interfaces.
Table 2.5: SVGA Connector
Item Specification
Connector type 15-way D-type
Connector designation Video Out
Pin-outs
1 Red / Pr
75 , 0,7Vt-t
2 Green / Y
75 , 0,7Vt-t
3 Blue / Pb
75 , 0,7Vt-t
4 NC
5 Video GND
6 Red GND
7 Green GND
8 Blue GND
9 NC
10 Sync GND
11 NC
12 NC
13 H-Sync
14 V-Sync
15 NC
2.8.5 Digital Video Output
The IRD has two ASI/SMPTE 292M (HD-SDI) outputs in
the standard configuration.
The output standard (ASI or SMPTE 292) must be
selected from the user interface or remote control
interface.
The HD-SDI output is coaxial via BNC connectors. Video
control is through the Video Menu (Menu 3.1).
Table 2.6: Digital Output Connector
Item Specification
Connector type BNC 75 female socket
Connector designation ASI/HDSDI OUT 1
ASI/HDSDI OUT 2
Pin-outs Centre
Shield
Video output
Ground/Chassis
HDSDI OUT 1/2