Filter
Top Products
Operating the Equipment Locally
Page 3-6 Reference Guide: TT128x High Definition Professional Receiver/Decoder
ST.RE.E10141.5
3.4 Using the Local Controls
3.4.1 LCD Menu Descriptions
Detailed LCD menu descriptions are given in Annex C, Menus. This chapter
concentrates on describing the use of the menus for local operation.
3.4.2 Selecting a Menu Option
Some items shown in the right display area of the front panel LCD display
have a set number of options. An example of this is the VIDEO TEST
PATTERN (Menu 3.1.6) which has a number of preset Video Test Patterns
associated with it. Use the following steps as a general guide to selecting
an option.
Table 3.3: Selecting a Menu Option
Step Action Result
1 Select the menu and display the required
selection.
Normally there is only one selectable item. If there is more than
one, use the Right and Left pushbuttons as described in
Table 3.4.
2 Press Edit on the front panel. The Save button will come on to show that the new option can be
stored.
3 Use the arrow pushbuttons to step through
the options.
This action scrolls through the options in a continuous loop.
4 Press Save to store the option or press Edit
to cancel the selection and return to the
source menu.
3.4.3 Entering a Menu Value
Some items shown in the right display area of the front panel LCD display
have a user-entered value. An example of this is the IP Address
(Menu 7.1.3) in which the unit’s Network address has to be entered. Use
the following steps as a general guide to entering a value.
Table 3.4: Entering a Menu Value
Step Action Result
1 Select the menu and display the required
selection.
2 Press Edit on the front panel. The Save button will come on to show that the new value can be
stored.
3 Use the Right or Left pushbutton to move
the cursor to the required digit.
Each pushbutton has a built-in LED that turns on if the pushbutton
function is appropriate to the displayed information.
4 Change the value by using the arrow
pushbuttons.
5 Press Save to store the option.