Filter
Top Products
Installing the Equipment
Reference Guide: TT128x High Definition Professional Receiver/Decoder Page 2-3
ST.RE.E10141.5
2.1 Read This First!
2.1.1 Handling
The IRD must be handled and installed carefully and thoughtfully to
prevent safety hazards and damage.
2.1.2 Installing the Equipment
Ensure the personnel designated to fit the unit have the appropriate skills
and knowledge. If in any doubt, contact TANDBERG Television Customer
Services (see Preliminary Pages for contact details).
Installation of the product should follow these instructions, and should only
use installation accessories recommended by the manufacturers. When
rack mounted, this equipment must have shelf supports as well as being
fixed at the front panel.
Do not use this product as a support for any other equipment.
2.1.3 Lifting
In some circumstances the unit might be awkward to lift. In which case, do
not attempt to lift or move it without proper assistance or equipment. If in
doubt, seek assistance.
2.1.4 Site Requirements
Power Supplies
See Annex B, Technical Specification for a full specification.
Environment
See Annex B, Technical Specification for a full specification.
Do not install this product in areas of high humidity or where there is
danger of water ingress.
Lightning Protection
WARNING…
IF THE RECEIVER HAS BEEN SUBJECT TO A LIGHTNING STRIKE OR POWER SURGE WHICH
HAS STOPPED IT WORKING, DISCONNECT THE POWER IMMEDIATELY. DO NOT REAPPLY
POWER UNTIL IT HAS BEEN CHECKED FOR SAFETY. IF IN DOUBT, CONTACT TANDBERG
TELEVISION CUSTOMER SERVICES.
Where appropriate, ensure this product has an adequate level of lightning
protection. Alternatively, during a lightning storm or when it is left
unattended and unused for long periods of time, unplug it from the supply
outlet and disconnect the output equipment. This prevents damage to the
product due to lightning and power line surges.