Automatic Tuning System:
- Shortly push the buttons or
Depending on the button pushed the frequency range will be searched
through downwards or upwards.As soon as a station has been found
the Automatic Tuning System will be stopped.
Storing the station:
- Select a programme memory position (
-
) where you want to store
the programme.
- Push the respective numerical key on the device and hold it until a
signal tone can be heard.
The station is now stored on this programme position for the selected
frequency range.The number of the programme position is indicated on the
display.
13
3 Detailed instructions 3 Detailed instructions
Shortly push
Shortly push
MAN
Select the desired programme position,
hold button until signal can be heard
To store, push button
until signal can be heard
Shortly push the desired programme
button to call up station
Set the
frequency
Calling up the station stored as above:
- Push the respective programme memory button(
-
).The
programme which is stored under this number in the selected reception
range is called up.
Manual station search:
When you are searching for stations which can only be received very weakly it
might be advantageous to enter the reception frequency manually.Proceed
as follows:
Frequency setting:
- Set the frequency range as described under 3.2.1..
- Shortly push the button to switch to manual station search.
- By means of the buttons or
you are now able to set the frequency.
Bed.Anl. Werra1 englisch 09.04.1998 11:54 Uhr Seite 13
