Filter
Top Products
- Push both buttons simultaneously, however, only halfway.
The running direction changes and the other side of the cassette is played
3.3.3Fast Forward/Rewind
- Push the buttons
or
completely,depending on the direction
in which the cassette shall be winded.
- If you want to interrupt the winding push the button which is not
activated halfway.
The winding stops and the cassette will be played from this position.
3.3 Cassette unit
The TechniSat WERRA 1 is equipped with a high-quality stereo auto reverse
cassette drive mechanism.This is operated as follows:
3.3.1 Inserting/ejecting a cassette
Before you insert the cassette in the slot take care that the tape in the cassette
is winded tightly. If this is not the case you can wind it with a pen or something
similar and then insert it as follows:
- Insert the cassette in the slot.Take care that the opening through which
the tape can be seen is on the right side.The cassette will now be
played.
- The cassette ejector can be activated by pushing both
buttons completely and simultaneously.
3.3.2 Changing the track/auto reverse
The TechniSat WERRA 1 is equipped with an auto reverse drive mechanism
which, at the end of the cassette,automatically changes the running direction
and plays the other side.
This function (changing of the track) can also be activated before the end of
the cassette.
18
3 Detailed instructions 3 Detailed instructions
Simultaneously push buttons halfway;
cassette changes the running
direction
Push one button to wind;
push other button halfway
to stop
S
t
e
p
1
Push both buttons
simultaneously;
cassette will be
ejected
Insert the cassette
with opening on
the right side
S
t
e
p
1
S
t
e
p
2
S
t
e
p
1
Bed.Anl. Werra1 englisch 09.04.1998 11:54 Uhr Seite 18