Filter
Top Products
3.3.6 AMS (Automatic Music Search) function
When playing the cassette this function enables to wind to the beginning of
the next title or to the beginning of the title which is currently running.However,
the basic requirement for this is that there are recording intermissions of at
least 3 seconds between the individual titles.
Switching on the AMS mode:
- Shortly push the 4 button during reproduction.
The letters “AMS“ are indicated on the display.
4
SHUFF
AMS
3.3.4 Dolby B noise suppression
The TechniSat WERRA 1 is equipped with the Dolby B noise suppression system
which clearly improves the reproduction of cassettes recorded with this
system.
- You can switch on the noise suppression during the reproduction by
shortly pushing the button.
A symbol appears on the display.
- The noise suppression can be switched off by pushing
the button again.
3.3.5 Tape type adjustment
The cassette drive mechanism is suitable for normal and chromedioxide tapes
as well as for metal tapes.
If a metal tape is inserted you only have to carry out the following switching
(see right):
- You can switch on the adaptation during the reproduction by shortly
pushing the button.
The letters “MTL“ are indicated on the display.
- This adaptation can be switched off by a further push on
the button.
5
REP
MTL
5
REP
MTL
6
6
19
3 Detailed instructions 3 Detailed instructions
Shortly push button 6 for noise
suppression; push again
to switch off
S
t
e
p
1
Shortly push button 5 for
tape selection; push again
to switch off
S
t
e
p
1
Shortly push button 4 to
switch on the AMS mode;
push again to switch it off
S
t
e
p
1
- beginning of the next title
- beginning of the current title
S
t
e
p
2
MTL
AMS
Bed.Anl. Werra1 englisch 09.04.1998 11:55 Uhr Seite 19