Topfield HV7700 HSCI Car Satellite Radio System User Manual


 
8 Setup
the power consumption of the digital receiver, refer to
Table 2.1.
The wall outlet should be near the equipment. Do not
run an extention lead to the unit.
Do not expose the digital receiver to any moisture. The
digital receiver is designed for use indoors only. Use dry
cloth when cleaning the digital receiver.
Place the digital receiver on a firm and level surface.
Do not place the digital receiver close to heat emitting
units or in direct sunlight, as this will impair cooling.
Do not lay any objects such as magazines on the digi-
tal receiver. When placed in a cabinet, make sure there
is a minimum space of 10 centimetres around it. For
the physical specification of the digital receiver, refer to
Table 2.2.
Protect the power cord from being walked on or
pinched. If wires are exposed or cord is damaged, do
not use the digital receiver and get cord replaced.
Never open the digital receiver casing under any cir-
cumstances. Warranty will be void.
Refer all servicing to a qualified service technician.
Table 2.1: Power specification
Input voltage 90 to 250V AC, 50/60 Hz
Power consumption 37W at maximum in operation
8W in standby
Table 2.2: Physical specification
Size 430× 60× 265 mm
Weight 2.9kg
Operating temperature 0 to 45°C
Storage relative humidity 5 to 95%