Filter
Top Products
20 Preference Settings
Select the System Setting >
Time Setting menu. You should
see a screen like the left figure.
You can make the local time to
be automatically set by using
Greenwich Mean Time (GMT).
To use Greenwich mean time,
take the following steps:
1. Set the Mode option to Auto; then the Time Offset option
becomes enabled.
2. Set the Time Offset option to thetime difference between
your time zone and GMT referring to Table 3.1.
3. To get Greenwich mean time, set the GMT Collection op-
tion to one among the following:
Normal from all transponders
CAS TP from transponders of pay services
User Select from transponders specified by you
If you set it to User Select, then the Satellite and Trans-
ponder options become enabled. Select your desired
satellite and transponders at those options. With the
above settings, the digital receiver will scan all trans-
ponders specified one by one until to get the Greenwich
mean time.
4. Make sure that your local time is correctly displayed on
the Local Time option.
To set the local time yourself, set the Mode option to Man-
ual and enter your local time into the Local Time option with
the numeric buttons. The time format is day/month/year 24-
hour:minute.