Filter
Top Products
3.3 Local time setting 19
NOTE
You can enjoy only standard definition video with the follow-
ing connectors:
• Composite video connector (VIDEO)
• SCART connector (TV)
3.2.5 Sound mode
Basically, there are two audio sources as you can find two au-
dio sockets on the back panel of the digital receiver. You can
enjoy only one source or both of them in eitherstereo or mono.
Set the Sound Mode option as you desire.
Apart from this setting, you can change the sound mode with
the
button. See § 5.2.4 for detailed description.
The digital receiver can output two types of digital audio sig-
nals via the S/PDIF connector. One is an encoded signal, and
the other is a decoded signal. If your digital audio appliance
does not have a Dolby Digital decoder, you have to set the
Dolby Digital option to PCM. Otherwise, set it to Bitstream.
3.3 Local time setting
You should set your local time for timer events. If you do not
set the local time right, the programme time table provided by
the programme guide may be distrustful. For the programme
guide, refer to § 5.3.