Filter
Top Products
4.1 Searching broadcasting services 29
3. Input the position of your selected satellite to the Satel-
lite Angle option if it is not correct.
4. Select the Goto the position option. Then the antenna
will turn toward your selected satellite calculating its
position.
5. If the receiving quality, which is displayed at the bottom
right of the screen, is not good, then tune the antenna
finely with the options of the Move menu. The changed
position is automatically saved. At this time you had
better check the receiving quality of every transponder
and choose the best one at the Transponder (or Fre-
quency) option. It will be helpful to your fine tuning.
4.1.4 Searching services
To perform service search, se-
lect the Installation > Service
Search menu. You should see a
screen like the left figure.
There are four service search methods:
• Searching every service of a satellite.
• Searching every service of a transponder.
• Searching one service of a transponder.
• Searching every service of a SMATV (Satellite Master
Antenna Television) transponder.
To search every service of a satellite, perform the following
steps: