Filter
Top Products
28 Service Search
5. Finally select the Store option at the Motor Control menu
to save the tuned position when the receiving quality
has turned good.
There are more motor control options for installers, but this
manual does not describe them. If you are an installer, refer
them to the manual for the STAB rotor.
4.1.3 Configuring USALS settings
USALS (Universal Satellite Automatic Location System), also
known as DiSEqC 1.3, calculates the positions of all available
satellites from your location. Compared to DiSEqC 1.2, it is no
longer required to manually search and store every satellite
position. Just pointing to a known satellite position is enough.
This position will act as the central point. The USALS will
then calculate positions of visible satellites.
To use the USALS, select the
Installation > USALS Setting
menu. You should see a screen
like the left figure.
At first you have to set the Mo-
torized DiSEqC 1.3 option to
Enable.
To calculate every satellite position, perform the following
steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Input your location to the My Longitude and My Latitude
options with the
✄
✂
✁
V− ,
✄
✂
✁
V+ and numeric buttons.