Filter
Top Products
1
Getting started
Tuning the TV for the first time
Before switching on the TV, put your decoder and media
recorder to Standby if they are connected and ensure the
antenna is connected. To setup the TV use the buttons on the
remote control as detailed on page 10.
This screen will appear the first time that the TV is
switched on and each time the TV is reset.
Press v or w to select the Menu Language function.
Language include the English, Français and .
Use s to select Province/State. Press
v or wto select
the state in which you live. State include the NSW/
ACT(New South Wales/Australian Capital Territory),
VIC(Victoria), QLD(Queensland), SA(South Australia),
WA(Western Australia), TAS(Tasmania) and NT(Northern
Territory）.
Press to setup Ener
gy Saving Mode.
Press v
or w to select the Energy Saving Mode.
Notes:
To ensure your television is operating at optimal energy ef-
ficiency, select Home mode during initial activation. Home
mode is recommended for normal home use.
Energy Saving Mode: The factory default settings of this
television meet ENERGY SAVING requirements. Changing
Picture Settings may increase energy consumption, possibly
beyond the limits required for ENERGY SAVING qualifica-
tion.
To return to Home mode settings, select Standard picture
mode.
Standard picture mode is used to achieve published average
power values, and this mode is recommended for normal home
use.
Press to set Ener
gy Saving Mode and to start ATV/
DTV Scan .
The Auto Scan screen will appear and the TV will
automatically start to search for available stations. The
progress bar will move along the line.
1�
2�
3�
4�
5�
6�
When DTV search is completed, the TV will automatically
turn to the lowest logical channel number.
Programming channels into the
TV’s channel memory
Full Search - digital only -
As new services are broadcast, it will be necessary to re-tune
the TV in order to view them.
Full Seach will completely re-tune the TV and can be used
to update the channel list. It is recommended that Full Seach
is run periodically to ensure that all new services are added.
All stored programs and settings, including Timer entries,
favorites and locked programs, will be lost.
Press
, and v or w to select the SETUP menu.
Press
, and r or s to select Full Search menu.
Press
, a confirmation screen will appear indicating
that This will do full search, Are you sure?
Press , to start Auto tuning.
The below sample display shows F
ull Search in progress.
The channel number will show 1~ 69.
DTV
Channels
will display searched channel and name
information.
Radio
Channels
will display searched channel and
name information.
7�
1�
2�
3�
4�