Filter
Top Products
1
Using the TV’s features (General)
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
- analog only -
Auto mode
The MTS Auto mode automatically recognize stereo/bilingual
programs depending on the broadcast signal.
Press , then press v or w to display the SOUND
menu then press .
Press s or r to select MTS, then press and v or w
to select Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual program, set the Sound mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular program on whose
channel reception is usually good, try setting MTS mode to
Auto, then switch
to Mono (monaural).
Selecting the dual 1 or dual 2 mode
- analog only -
You can hear only dual 1 or dual 2 sound selected, whenever
bilingual programs are received.
Press , then press v or w to display the SOUND
menu then press .
Press s or r to select Dual, then press and v or w
to select Dual 1 or Dual 2.
Notes:
When the MTS setting is in Mono mode, the Dual menu is
not selectable.
The Dual menu setting status remains even if the TV is
turned off.
1�
2�
1�
2�
•
•
Selecting the stereo programs - analog only -
When a stereo program is received, Stereo appears.
Press to select the Auto/Mono mode. Auto and Mono
appear cyclically on the screen.
Selecting the bilingual programs - analog only -
When a bilingual program is received, Dual appears.
Press to select the sound to be heard. The sound
differs according to the transmission system: NICAM or
German stereo/bilingual broadcast.
Display
Sound to be heard
NICAM
G
erman stereo/
bilingual broadcast
Dual 1 Sub I sound Main sound
Dual 2 Sub II sound Sub sound
Mono Main sound ---
Note:
These settings are not stored in the TV memory.
Adjusting the sound quality
Press , then press v or w to display the SOUND
menu then press .
Press s or r to select Selectab
le Sound, then press
and v or w to select Standard, Movie, Music and
User.
In User item , you can press s or r to select an item
you want to adjust, press v or w to adjust the settings as
required.
When you select
Standard, Movie
or
Music,
the setting
was fixed and can’t
adjust.
Selection
v
Pressing
w
Bass weaker stronger
Treble weaker stronger
Balance
decreases the right
channel
decreases the left
channel
1�
2�
1�
2�
1�
2�
3�