Filter
Top Products
Using the TV’s features (General)
Using Auto mode
There are two Modes: Auto will display FASTEXT or
TOPTEXT, if available. LIST will display your four favorite
pages. In either mode, as an alternative to the colored buttons,
you can access a page by entering a 3-digit number, using the
Number buttons on the remote control, or to advance to the
next page, press
or r, to go back to the previous page
press
or
s.
To change between Auto and LIST, see above.
Press
to access teletext.
If FASTEXT or TOPTEXT is available, you will see 4 colored
titles at the bottom or top of the TV screen respectively. To
access any given subject, simply press the relevant colored
button on the remote control.
If FASTEXT or TOPTEXT is not available, you can access any
page simply by entering a 3-digit page number or pressing the
corresponding colored button.
For further information on your particular text system(s), see
the broadcast teletext index page or consult your local Toshiba
dealer.
Using LIST mode
Press to access teletext.
The four choices at the bottom of the screen are now
number –
100
,
200
,
300
and
400
, which have been
programmed into the TV’s memory.
To view these pages, use the colored prompt buttons.
e.g. press the Green button to view page 200.
If you want to change these stored pages, press the colored
button for the color you want to change.
e.g. Press the Green button and enter the 3-digit number.
This number will change in the top left of the screen and
in the colored highlight.
•
1�
2�
3�
Teletext in Analog TV
This TV has a multi-page teletext memory, which takes a few
moments to load and it offers two ways of viewing Teletext
Auto and LIST which are explained below.
Setting up the teletext mode
To select teletext mode:
Select a channel position with the desired teletext service.
Press
, then press v or w to display the FUNCTION
menu.
Press s or r to select Teletext Mode, then press v or
w to select Auto or LIST mode.
Teletext general information
button:
Pressing once will bring up the teletext screen.
Press again to superimpose the teletext over a normal
broadcast picture. Press again to return to normal TV mode.
You need to return to normal viewing if you wish to change
channels.
When you first press
to access the text service, the
first page you see will be the initial page.
In Auto mode, this displays the main subjects available and
their relevant page numbers.
In LIST mode, you will see the page numbers currently stored
on the each color button.
Sub-pages:
Once in this chosen page, if there are sub-pages they will
automatically load into memory without changing the one you
are reading. If there are many sub-pages, it will take a long
time for them all to load and this will depend on the speed with
which the broadcaster transmits them.
To access the sub-pages in memory, press
, then use
v or w
to view them.
Note:
If you press
while the picture mode is activated, this mode
will be cancelled.
1�
2�