Filter
Top Products
Other Digital TV features and settings
AV Connection
Press
, then press v or w to select the FUNCTION
menu.
Press and press s or r to select AV Connection,
then press .
Press s or r to select Video 1 or Video 2, then press
v or w
to select input source as required.
Video 1
selections are YPbPr and CVBS.
Video
2 selections are CVBS and S-Vide.
Notes:
Default settings of Video1 is YPbPr input. And default settings
of Video2 is CVBS input.
You can select YPbPr input, CVBS input or S-Video input from
AV Connection.
i.e.: CVBS - Composite Video
YPbPr - Component Video
Subtitle
When on-screen information indicates the presence
of Subtitle (CC) in a channel, press to display the
current Subtitle status. While this status is displayed,
press again to change the setting. Subtitle On or Off can
be selected.
If you switch off the TV, the Subtitle mode will be
remembered the next time it is switch ON.
Notes:
If Subtitle is ON, the TV will always display subtitle
whenever such information is available in the channel you
are viewing. You may use
to check if subtitle is currently
available.
In Australia, you may also view Subtitle by directly entering
page 801 in Teletext. However, by doing so, the TV remains
in Teletext mode and you cannot change the channels
because
and will change Teletext pages rather
than channels. To view subtitle, it is recommended that you
turn on Subtitle mode.
If Subtitle is ON, When user press
on remote control
that audio mute function can work but the TV won't display
mute icon in screen.
1�
2�
3�
1�
2�
•
•
•
Audio Preference
Selecting The Audio Mode
From the SETUP menu, press s or r to select Audio
Mode, then press .
Press s or r to select A
udio Mode or Digital Audio
Output then press v or w to select mode.
Press v or w to select Dolby
Digital
or MPEG.
Dolby Digital
If you select this option, the TV will select the
first Dolby Digital audio track, if available. However, if the
channel does not contain any Dolby Digital audio track,
then the first available MPEG audio track will be selected.
MPEG
If you select this option, the TV will select the first MPEG
audio track, if available. However, if the channel does not
contain any MPEG audio track, then the first available
Dolby Digital audio track will be selected.
Note:
Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby
Laboratories.
Digital Output Format
From the Audio Mode, press v or w to select Digital
Audio Output.
Press v
or w to select Bitstream or PCM.
Bitstream
: Select this when an amplifier equipped with
builtin Dolby Digital or MPEG decoder is
connected to this TV.
PCM
: Select this when a 2ch digital stereo
amplifier is connected to this TV. When you
select a Dolby Digital or MPEG audio track
in Audio Track, the sound is converted to the
PCM (2ch) format and output.
1�
2�
3�
1�
2�