Filter
Top Products
Using the TV’s features (General)
Press w into the Timer data position and press s and r
to set the time period.
Press
to start the timer.
Notes:
After power code unplug/plug, the
Timer setting change to
default.
Setting the Power Control
Press , then v or w to display the Timer menu, then
press
.
Press s or r to select P
ower Control, then press .
Press s or r to select which you want adjust, then press
v
or w
to set function.
No Operation Off can be set Disable or 1 to 6 hours.
No Signal Off can be set Disable or 5 to 45 minutes.
Notes:
If you set No Operation Off for 1~6 hours, it will
automatically power off when you do not do any
operation.
If you set No Signal Off for 5~45 minutes, it will
automatically power off when input has no signal.
Power Control
function (No Signal Off) will work only
on the ATV, 1, 2, PC, HDMI and DTV sources.
Setting the Banner Duration - digital / analog -
Press , then v or w to display the TIMER menu, then
press
.
Press sor r to select Banner
Duration, then press .
Press v
or w to set Banner Duration which can be set
1 to 12 seconds.
4�
5�
1�
2�
3�
A.
B.
•
•
•
1�
2�
3�
Notes:
Banner Duration function is setting on-screen information
display timing.
On-Screen-Display will remain about 1 minute.
Selecting the video input source to
view
Press on the remote control to display the video input
mode list, then presss or r to select appropriate input
source. You may also press to display the video input
mode.
Press .
DTV
(Digital TV)
1
(CVBS input or component video input)
( page 27)
2
(CVBS input or S-video input)
( page 27)
HDMI 1
,
HDMI 2
(HDMI input)
PC
(PC input)
ATV
(Analog TV)
•
•
1�
2�