Filter
Top Products
User’s Manual 6-2
Power and Power-Up Modes
Power indicators
As shown in the above table, the Battery, DC IN and Power indicators on
the system indicator alert you to the computer's operating capability and
battery charge status.
Battery indicator
Check the Battery indicator to determine the status of the battery. The
following indicator lights indicate the battery status.
AC adaptor
not
connected
Battery charge
is above low
battery trigger
point
• Operates
• LED: Battery off
DC IN off
—
Battery charge
is below low
battery trigger
point
• Operates
• Alarm sounds (depending
on the TOSHIBA Power
Saver utility setting)
• LED: Battery flashes
amber
DC IN off
—
Battery charge
exhausted
Computer goes into
Hibernation or shuts down
(depending on the
TOSHIBA Power Saver
utility setting)
—
No battery
installed
• No operation
• LED: Battery off
DC IN off
—
Power on Power off (no operation)
Flashing amber The battery charge is low. The AC adaptor must
be connected to recharge the battery
Amber Indicates the AC adaptor is connected and
charging the battery.
Green Indicates the AC adaptor is connected and the
battery is fully charged.
No light Under any other conditions, the indicator does
not light.