Filter
Top Products
User’s Manual 4-23
Operating Basics
Dialing Properties
Select this item to display the dialing properties.
Connecting
To connect the internal modem cable(optional), follow the steps below.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack
Connecting the internal modem
Disconnecting
To disconnect the internal modem cable(optional), follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. Disconnect the cable from the computer in the same manner.
If you are using the computer in Japan, technical regulations described in
the Telecommunications Business Law require that you select Japan
region mode. It is illegal to use the modem in Japan with any other
selection.
■ In case of a lightning storm, unplug the modem cable(optional) from the
telephone jack.
■ Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
Do not pull on the cable or move the computer while the cable is
connected.
If you use a storage device such as a DVD-ROM drive or HDD connected
to a 16-bit PC card, modem speed might be slow or communication might
be interrupted.
If modem speed is low or communication is interrupted when you are using
modem, please check and set CPU speed to Maximum by TOSHIBA
Power Saver utility.