xii
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
General Precautions
●The unit may malfunction if the connecting cables become disconnected or the connection
is unstable while the unit is in operation. Be sure all connectors are securely fastened and
do not touch them while the unit is in operation.
●Observe the instructions provided in the manuals included with the PC and other periph-
eral devices.
●This device may cause signal interference when used in a domestic setting. When inter-
ference occurs, move this unit as far as possible away from the affected device.
●The disks entitled “Utility Software” (utility for updating the firmware) is specifically intend-
ed for this unit. Do not use the disks with any other device.
●ICOM Inc. assumes no responsibility whatsoever for any trouble resulting from using the
data files originally provided with this unit or the firmware update data files provided on our
website in a device other than this unit, or modifying or disassembling this unit. Nor does
ICOM Inc. assume any responsibility whatsoever for any damages or lost profits resulting
from opportunities for voice or signal communications being lost because of the failure,
malfunction, poor condition, damage, or data loss of this unit or because of such external
causes as power failure. ICOM also dismisses all responsibility for demands made by a
third party.
●All copyrights associated with this manual and all intellectual property rights associated
with the hardware and software of this product are held by ICOM Inc.
●Unauthorised reproduction or transmission of this manual, or any part hereof, is prohibited.
●The content of this manual, the hardware and software associated with this product, and
the appearance of this product are all subject to change without notice.
■AC adapter
● Do not use with an AC supply voltage
other than 230 V.
Otherwise fire, electric shock, or equip-
ment failure may result.
● Do not use with any device other than
the AP-12.
Otherwise fire, electric shock, or equip-
ment failure may result.
● Do not modify, excessively bend,
twist, pull, or heat the AC power cable.
Otherwise the cable may be damaged
and cause a fire, electric shock, or equip-
ment failure.
● Do not place heavy objects on top of
the DC output cable or allow the cable
to be pinched.
Otherwise the cable may be damaged
and cause a fire, electric shock, or equip-
ment failure.
● Hold the adapter body when plugging
in and unplugging the AC adapter. Do
not yank the cable.
Otherwise fire, electric shock, or equip-
ment failure may result.
● Do not handle the AC adapter plug or
other devices with wet hands.
Otherwise electric shock may result.
● Do not use the AC adapter if the DC
output cable is damaged or the plug
does not fit securely into the recepta-
cle.
Otherwise fire, electric shock, equipment
failure, or data loss may result.
Consult with your dealer or the service
staff at one of our sales offices regarding
how to handle the problem or obtain a
new AC adapter.
RWARNING
Failure to observe the precautions listed here could
result in serious or fatal injury to the user or those
near the user.
AP-12_USA 02.7.26 9:32 AM Page xii (1,1)
