66
REFERENCES
7
7-6 Connection to the router type modem
This section describes the connection between a router type modem and the AP-12
with the default setting.
There are different types of modems available—bridging type and router type.
IMPORTANT!: The AP-12 cannot be connected to a bridging type modem directly.
Bridging type modem: Usually connects one PC only and a global IP address is
assigned to the PC.
Router type modem: Multiple PC’s can be connected in the LAN via the HUB, and
a private IP address is assigned to the PC.
DD
Wireless terminal preparation
After the following preparation is completed, wireless communication can be made
with the AP-12 when using Icom’s wireless LAN card.
q Prepare the PC to use the wireless LAN card.
w Install the supplied wireless LAN card driver.
Install other applications or utilities if supplied.
• Refer to the instruction manual supplied with the LAN card for driver, applica-
tions and utilities installation.
e Install [AP-12 Manager].
• [AP-12 Manager] is used for IP address confirmation, AP-12 settings, etc.
AP-12_USA 02.7.26 9:33 AM Page 66 (1,1)
