13
2
OBTAINING AN IP ADDRESS FROM THE DHCP SERVER
2
e Click the desired access point name and then click <Connect>.
• [AP-12 Manager] Setting screen (p. 14) appears on the screen.
2-3 Starting [AP-12 Manager]
This section describes about the verification of the IP address obtained, using the
[AP-12 Manager].
• Supposing that the connection between the LAN and AP-12 has already been done
in this section.
• Quit [Easy Setting Wizard] when it is running.
[Procedure]
q Click <Start> and select [AP-12 Manager] from the [Program menu].
w Click <Search>, then verify the IP address obtained.
• When no IP address is displayed, click <Search> again.
About AP-12 icon:
An icon is displayed on the task bar while the
[AP-12 Manager] is activated.
Right-click the icon and select “Connect to access point” from the menu to open the
[AP-12 Manager] setting screen.
Verify
2.
Click
1.
Click
2.
Click
1.
Displays the connected
AP-12’s IP address
AP-12_USA 02.7.26 9:32 AM Page 13 (1,1)
