28
FIXED IP ADDRESS SETTING
3
3-4 Starting [AP-12 Manager] (continued)
e When the error dialog “Cannot connect to the access
point” appears on the screen, each AP-12 and the PC’s
network IP address may be different. In such a case,
click <OK> and close the dialog. Then, exit [AP-12
Manager].
To exit the AP-12 Manager:
Move the cursor on the icon in the task bar, then right-
click. Then select “Exit” in the menu that appears.
r Follow the steps q to i in Chapter 3-2 (p. 17) to set up
the PC again.
t The following screen appears after rebooting.
Click <Cancel>.
Click
y Follow the steps q and w in Chapter 3-4 (p. 27) to re-starting [AP-12 Manager]
again.
• [AP-12 Manager] Settings screen as in page 29 is displayed when the setting is
successful.
AP-12_USA 02.7.26 9:32 AM Page 28 (1,1)
