14
OBTAINING AN IP ADDRESS FROM THE DHCP SERVER
2
2-3 Starting [AP-12 Manager] (continued)
■ [AP-12 Manager] Setting Screen
After installing [AP-12 Manager], the following screen appears first.
q to r are common buttons in the [AP-12 Manager] screen.
To exit [AP-12 Manager]
Move the cursor on the icon in the task bar then right-click.
Select “Exit” in the menu that appears.
q <Restore default>
Restores all the contents of the
screen to the default settings.
The AP-12 searches the DHCP serv-
er and sets an IP address obtained
from the server.
See Chapter 3 to restore completely.
w <OK>
Registers the value or condition of all
contents in the screen to the AP-12
and closes the screen.
e <Cancel>
Cancels the value or condition of all
contents registration in the screen
and closes the screen.
r <Apply>
Registers the value or condition of all
contents in the screen only. The
screen is kept open.
wq e r
AP-12_USA 02.7.26 9:32 AM Page 14 (1,1)
