A SERVICE OF

logo

Open as PDF
next previous
62
REFERENCES
7
7-4 Failure in searching for the AP-12 (continued)
r Enter the desired IP address for the AP-12. The network part must be the same
as the PC’s IP address.
t Enter the MAC address, described on the serial number seal.
y Turn the power OFF.
After waiting a few seconds, turn the power ON again.
u Click <Set IP>.
i After 30 seconds (approx.: from clicking <Set IP>), click <Close> when the mes-
sage stating that the setting is completed appears.
• Do not turn the power OFF at this stage, as the setting will be erased and return
to the condition in step r.
Click
3.
Enter
1.
Enter
2.
Click
2.
Verify
1.
AP-12_USA 02.7.26 9:33 AM Page 62 (1,1)