69
7
REFERENCES
7
• LAN interface : Ethernet plug (Type RJ-45)
Based on IEEE802.3/10BASE-T
• Transmission rate : 10 Mpbs
• User interface : Status indicators (Power, Wired LAN,
Wireless LAN)
• System requirements : PC/AT compatible computer
Windows XP/Windows Me/Windows
2000/Windows 98 or Windows 98 SE.
* The stated specifications may be subject to change without notice.
* The transmission range may vary depending on the transmission speed and
the environmental conditions.
■ Specifications for Ethernet Plug
* The stated specifications may be subject to change without notice.
■ Wireless LAN for the AP-12
To communicate with the AP-12, the PC must be installed with Icom’s Wireless LAN
products for 11 Mbps.
• WEP security function is available with use during communication between Icom
products.
• Bridge Mode is not available except with Icom products.
• When functional mode is Bridge Mode B, select the AP-12 as the access point.
12345678
Modular plug type RJ-45 (8-pin) ×1
1. Sending (+) 2. Sending (–)
3. Receiving (+) 4. Not used
5. Not used 6. Receiving (–)
7. Not used 8. Not used
AP-12_USA 02.7.26 9:33 AM Page 69 (1,1)
