5: Commands and Levels
PremierWave XN Command Reference 142
with other devices.
tcp keep alive <milliseconds>
Enables TCP keep alive for connect mode tunneling and
sets the timer.
<milliseconds> = timer value, in milliseconds.
validate certificate disable
Skips verification of the server certificate when connect-
ing.
validate certificate enable
Requires verification of the server certificate when con-
necting.
Makes connections using the specified Address.
Makes connections using the VIP name.
Stores the current configuration in permanent memory.
host 9 (config-host:9) level commands
Restores the default value of the protocol (Telnet).
Sets the remote port (used to connect to the host) to the
default value,
which depends on the selected protocol.
Exits to the configuration level.
Change to config host level
name <text>
Sets the name of the host.
<text> = name of the host.
Clears the name of the host.
Clears the remote address of the host.
Clears the SSH username associated with the host.
Sets the protocol to SSH.
Sets the protocol to Telnet.
Sets the IP address of the remote host to connect to when
this host is
selected on the login connect menu.
remote port <number>
Sets the remote port used to connect to the host.
<number> = port to be used.
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
Sets the username for logging into the host via SSH.
<text> = username.
Stores the current configuration in permanent memory.
http (config-http) level commands
Creates a new HTTP server authentication directive.
<uri> = URI of the server.
Sets an HTTP server authentication directive to the Digest
Access
Authentication scheme.
<uri> = URI of the server.
Sets the authentication type for an HTTP server authenti-
cation directive to
none.
<uri> = URI of the server.
auth type <uri> ssl
Sets the authentication type for an HTTP server authenti-
