5: Commands and Levels
PremierWave XN Command Reference 80
bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
show connection statistics
<text>
Selects the RSA/DSA certificates by name for the SSL
Restores the default protocol as "TCP".
Restores the default 45 second connect mode TCP keep
alive timeout.
Exits to the next higher level.
Removes the remote host address used to establish
tunneling connections.
Removes the connect tunnel AES decrypt key.
Removes the connect tunnel AES encrypt key.
Clears the RSA/DSA certificate selection.
no port Removes the remote port used to establish tunnel con-
Removes the SSH user name.
Disables the connect mode TCP keep alive timeout.
Sets the remote port to use for connect mode tunneling.
<number> = number of the port to use.
Uses SSH protocol for connect mode tunneling.
Uses SSL protocol for connect mode tunneling.
Uses TCP protocol for connect mode tunneling.
Uses TCP protocol with AES encryption for connect mode
tunneling.
Uses Telnet protocol (with IAC) for connect mode tunne-
ling.
Uses UDP protocol for connect mode tunneling.
protocol udp aes
Uses UDP protocol with AES encryption for connect mode
tunneling.
Shows the current configuration.
show history Displays the last 20
commands entered during the current
CLI session.
show connection statistics
Sets the SSH user name for use when establishing tunne-
ling connections
with other devices.
tcp keep alive <milliseconds>
Enables TCP keep alive for connect mode tunneling and
sets the timer.
<milliseconds> = timer value, in milliseconds.
validate certificate disable Skips verification of the server certificate when connect-
validate certificate enable
Requires verification of the server certificate when con-
necting.
Makes connections using the specified Address.
Makes connections using the VIP name.
