5: Commands and Levels
PremierWave XN Command Reference 144
Restores the HTTP counters to the aggregate values.
Disables the HTTP Server port.
Clears the RSA/DSA certificate selection.
Disables the HTTP Server SSL port.
port <number>
Sets the port number the HTTP server will use.
secure credentials <text>
Selects the RSA/DSA certificates by name for the HTTP
server.
Sets the port number the HTTP server will use over SSL.
<number> = port number.
secure protocols ssl3 disable
secure protocols ssl3 enable
secure protocols tls1.0 disable
secure protocols tls1.0 enable
secure protocols tls1.1 disable
secure protocols tls1.1 enable
Displays the current configuration.
Displays the HTTP server authentication settings.
show history
Displays the last 20 commands entered during the current
CLI session.
Displays the HTTP server log.
Displays the HTTP statistics.
Disables the HTTP server.
Stores the current configuration in permanent memory.
icmp (config-icmp) level commands
Exits to the configuration level.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Prevents ICMP packets from being sent or received.
Allows ICMP packets to be sent and received.
Stores the current configuration in permanent memory.
if 1 (config-if:eth0) level commands
default gateway <IP address>
Sets the configurable gateway IP address to the default
Restores the default Maximum Transmission Unit (MTU)
size.
domain <text>
Sets the domain name.
<text> = name of the domain.
Exits to the config level.
<text>
Sets the host name.
<text> = name of the host.
