5: Commands and Levels
PremierWave XN Command Reference 57
mode tunneling
flush start character disable
Enables forwarding of the connect start character into the
network.
flush start character enable
Disables forwarding of the connect start character into the
network.
<instance>
Enters the next lower level.
Specify the instance for the next lower level.
Connects to the first host in the list that accepts the con-
nection.
host mode simultaneous Selects simultaneous connections to all hosts on the host
Disconnects the active connect mode tunneling connec-
tion or connections.
Sets a specific port for use as the local port.
<number> = the number of the port to use.
no email connect Discontinues sending email alerts upon establishing a
Discontinues sending email alerts upon closing a connect
mode tunnel.
promote host <number>
Promotes the identified host, exchanging it place with the
host above it,
to adjust the order of the defined hosts.
reconnect time <milliseconds>
Sets the reconnect time value for tunneling connections
established by the
device in milliseconds.
<milliseconds> = timeout in milliseconds.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Displays tunnel connect status.
start character <control>
Sets the connect mode start character.
The character may be input as text, control, decimal, or
hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
Stores the current configuration in permanent memory.
credentials (ssl-credentials) level commands
Create a new credential name
Delete existing credential by name
View or edit an existing profile
Show existing credential names
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
device (device) level commands
Continuously displays the internal trouble log.
Exit to the enable level.
