A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
PremierWave XN Command Reference 159
exit
Exits to the CLI level.
max sessions <number>
Sets the maximum allowed concurrent incoming Telnet
sessions.
<number> = number of sessions.
port <number>
Sets the local port that the Telnet server uses.
<number> = local port number.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show statistics
Displays the Telnet statistics.
state disable
Disables the Telnet Server.
state enable
Enables the Telnet Server.
write
Stores the current configuration in permanent memory.
terminal 1 (config-terminal:1) level commands
break duration <milliseconds>
Sets how long a break should last when it is being sent to
the line.
<milliseconds> = number of milliseconds.
clrscrn
Clears the screen.
default break duration
Restores the break duration to the default value (500 ms).
default terminal type
Sets the default terminal type, "UNKNOWN".
echo disable
Disables echoing of characters received on the line back
to the line.
echo enable
Enables echoing of characters received on the line back
to the line.
exit
Exits to the configuration level.
exit connect menu disable On the login connect menu, removes the menu item allow-
ing the user to exit
to the CLI.
exit connect menu enable On the login connect menu, inserts the menu item allow-
ing the user to exit
to the CLI.
line <line>
Enters the line level.
<line> = number of the line (serial port) to be configured.
login connect menu disable
Disables the login connect menu, so a user will get the
CLI immediately
after logging in.
login connect menu enable
Enables the login connect menu, so a user will get the
menu rather than the
CLI immediately after logging in.
no send break
Removes the configured send break character.
preview connect menu
Shows the layout of the connect menu with current set-
tings.
send break <control>
Sets the optional send break character.
<text> = the character.
The character may be input as text, control, decimal, or
hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
terminal <line>
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be con-