63230-300-212 Chapter 3—Operation
April 2001 Configuring the Circuit Monitor Using The Setup Menu
25
© 2001 Schneider Electric All Rights Reserved
8. Press the menu button until “Save Changes? No” flashes on the display.
Select Yes with the arrow button, then press the enter button to save the
changes.
After selecting the I/O modules used with your circuit monitor, you can
configure the I/O modules. Follow the steps below to configure the inputs and
outputs for the I/O module you selected.
1. From the Main Menu, select Setup.
The password prompt displays
2. Select your password. The default password is 0.
The Setup menu displays.
3. Select I/O.
TheI/OSetupmenudisplays.
4. Select the I/O option that you have installed. In this example, we selected
the I/O Extender.
DO240AC 240 Vac output
Analog I/Os
AI05 0to5Vdcanaloginput
AI420 4 to 20 mA analog input
AO420 4 to 20 mA analog output
Table 3–6: I/O Descriptions
I/O Name Description
Configuring I/O Modules
SETUP
Date & Time
Display
Communications
Meter
Alarm
I/O
Passwords
I/O
KYZ
I/O Extender
