Filter
Top Products
18-EN
Erasing Disc Title
1 When the monitor display is open, press the
TITLE button to select the disc titling mode.
Then, press and hold for at least 3 seconds.
2 Press and hold the -/J button for at least 2
seconds to activate the title scanning mode. The
title in the display will blink.
3 Press the g DN or f UP button repeatedly
until the disc title you want to erase is displayed.
4 Press and hold the -/J button for at least 2
seconds to erase the disc title displayed.
5 Press and hold the TITLE button for at least 3
seconds to cancel the disc title erasing mode.
NOTE
You cannot erase a CD-TEXT.
CD Player/Changer Operation (Optional)
Controlling CD Changer
An optional 6-disc or 12-disc CD Changer may be
connected to the CVA-1003 if it is Ai-NET
compatible. With a CD Changer connected to the
Ai-NET input of the CVA-1003, the CD Changer
will be controllable from the CVA-1003.
Using the KCA-400C (the Multi-Changer
Switching device) multiple changers can be
controlled by the CVA-1003.
See the Multi-Changer Selection section on page
19 for selecting the CD Changers.
NOTE
The controls on the CVA-1003 for CD Changer operation
are operative only when a CD Changer is connected.
1 Press the SOURCE button to activate the CD
changer mode. The display shows the disc
number and track number.
NOTE
The source indicator varies depending on the connected
source.
::
::
:/
JJ
JJ
J
gg
gg
g DN
ff
ff
f UP
TITLE
BAND
SOURCE
Select buttons
(1 through 6)