Alpine CDA-9812RR Car Stereo System User Manual


 
25-EN
5
Repeat steps 3 and 4 above to complete the titling.
Pressing the Rotary encoder after entering the 8th
character automatically stores the title into memory.
When entering a title of less than 8 characters (for
example, 3 character title):
After entering 3 characters, the 4th character space will
be blinking. Go to step 6 to complete the title.
6
Press TITLE to record the title.
If you cancel while entering a title, selected characters are not
written.
You can enter 24 radio station titles and 18 CD titles on this unit. If
you try to store beyond the limit, the display will show FULL
DATA. At this point, no more titles can be stored. To input a new
title, one of the previously inputted titles must first be deleted.
The CD Changer title length or memory capacity varies depending
upon the model being used.
When you want to erase a title, enter the
(
for CDA-
9815RB) symbol into all spaces.
The operations described in steps 3 to 5 must be made within 10
seconds. The input mode will be cancelled if no action is taken for
over 10 seconds.
Erasing Disc Title/Station Title
1
Press TITLE to select the Title Display. Then, press
again and hold for at least 3 seconds.
For CDA-9815RB, see asterisk 1 of Displaying the Title/Text
(page 24).
2
Press and hold -/J for at least 2 seconds.
The title in the display will blink.
3
Press g or f repeatedly until the title you
want to erase is displayed.
4
Press and hold -/J for at least 2 seconds to erase
the title displayed.
5
Press TITLE to cancel the title erasing mode.
You cannot erase CD-TEXT.
•“NO DATA is displayed for 2 seconds if the title is not input in
step 2, or if the title is erased in step 4.
Blackout Mode On and Off
When Blackout mode is turned on, the display will turn off to reduce
power consumption.
This additional power enhances the sound quality.
Press and hold DISP/B.OUT (CDA-9815RB/CDA-
9813R/CDA-9812RX) or MUTE/B.OUT (CDA-9811R) for
at least 3 seconds to activate the blackout mode.
The display will turn off.
If any button on the unit is pressed during the blackout mode, the
function will be displayed for 5 seconds to show the operation
before returning to Blackout mode.
To cancel Blackout mode, press and hold DISP/B.OUT (CDA-
9815RB/CDA-9813R/CDA-9812RX) or MUTE/B.OUT (CDA-
9811R) for at least 3 seconds.
About Title and Text
Title:
With this device, it is possible to input the CD/Station name
(this page). This inputted name is referred to as a “title.”
You cannot input or display titles on MP3/WMA discs.
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
Some characters may not be displayed correctly with this device,
depending on the character type.
The CD changer must also be CD Text compatible for the Text
information to be displayed.
When the Scroll Setting (page 27) is set to SCROLL MANUAL,
press and hold TITLE for at least 3 seconds to scroll the Text
information only once (TEXT DISPLAY, FOLDER NAME
DISPLAY, FILE NAME DISPLAY or TAG DISPLAY mode).
•“NO SUPPORT (NO SUPRT for CDA-9811R) is displayed
when the desired text information cannot be displayed on this unit.
If the title was not previously input, NO TITLE is displayed.
Titling Discs/Stations
It is possible to title your favourite CD's or radio stations.
You cannot input titles on MP3/WMA discs.
1
Press TITLE and select the Title Display.
For details, see “Displaying the Title/Text” (page 24). For
CDA-9815RB, see asterisk 1 of “Displaying the Title/Text”
(page 24).
2
Press and hold TITLE for at least 3 seconds. The
first character will blink.
CDA-9815RB only
Press BAND/TEL. to select the characters/
symbols.
Upper case Lower case Numeral/Symbol
Upper case
3
Turn the Rotary encoder to select the desired
letter/numeral/symbol available for naming.
4
Press Rotary encoder to store the first character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.
Indicator/
Mode
1
2
3
4
5
6
CD Mode
While
displaying Title
While
displaying Text
(Disc Name)
While
displaying Text
(Track Name)
MP3/WMA
Mode
While
displaying
Folder Name
While
displaying File
Name
While
displaying
Artist Name
While
displaying
Album Name
While
displaying
Track Name
TUNER Mode
While
displaying Title
Tag information